Description
3.94" x 3.94" x .24" Cork backing has a glue side that is attached to the coaster after sublimation.
Product Instructions
Time: 1 minute : 30 seconds
Temperature: 400°F (204°C)
Pressure: Medium
Heat Press Instructions:
1. Cover the bottom table of the press with a sheet of protective paper.
2. Clean face of sandstone with a cloth to remove debris.
3. Secure transfer to substrate using ProSpray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: An 1/8" green pad needs to be used for edge to edge, full bleed designs and 1 minute of time needs to be added if using the pad.
***The imaging side of Sandstone is the brighter white side.